Skip to content

Cart

Your cart is empty

Before

After

Use the left and right arrow keys to navigate between before and after photos.

NanoPlasty Treatment

Today's premium salon service for smoothing, repairing, and hair health powered by nanotechnology. Nanoplasty gives clients sleek, shiny, frizz-free hair with minimal damage, long-lasting results, and high perceived value.

What is Nanoplasty?

Nanoplasty is a semi-permanent/smoothing/restorative hair treatment that uses nanoparticles or nano encapsulated actives (amino acids, keratin/protein, acids, natural oils) to penetrate deeply into each hair fiber. Unlike harsh straightening methods (e.g. formaldehyde-based), Nanoplasty works gently as it smoothens cuticles, restores strength, reduces frizz, and gives glossy, healthy hair. 

Key features often include:

  • Formaldehyde-free / low-chemical formula.
  • High penetration via super small particles so the actives reach deeper into the hair shaft without needing to open the cuticle aggressively.
  • Ingredients like proteins, keratin, amino acids, natural oils, acids to restore and seal hair fibre. 

Why Nanoplasty?

  • Frizzy, Weak or Flat Hair
    Clients with high frizz, damage, or whose hair loses shine and strength from heat, chemical processing, or weather. Standard smoothing or keratin treatments may be smooth but often with damage or strong chemicals. Nanoplasty provides smoother results with more hair health.
  • Sensitive Scalps / Health-Conscious Clients
    Those who want smoothing but are wary of toxic fumes, strong smells, formaldehyde etc. Nanoplasty offers a safer, cleaner route.
  • Long-Lasting Results & Gloss
    Clients want longer intervals between treatments. Nanoplasty’s effects can last 3-6 months (sometimes up to 5-6 months, depending on hair type & aftercare) with high gloss, smoothness, and manageability.
  • All Hair Types
    Works for curly, wavy, straight, colored, bleached hair — as long as process & aftercare are respected. 

How Nanoplasty Raises Salon Value

  • Premium service that can command higher pricing.
  • Less risk of damage lawsuits/complaints if done with safer formulas.
  • Strong visual transformations = powerful marketing content.
  • Re-booking / maintenance revenue from clients wanting to preserve results.

Why Salons & Stylists Choose NanoPlasty

  1. Visible Shine & Frizz Control
    Hair emerges with sealed cuticles, smooth surface, high gloss finish.
  2. Longer-Lasting Smoothness
    More durable than many traditional smoothing/softening treatments when aftercare is followed.
  3. Healthier Hair Structure
    Restores protein, reduces breakage, improves moisture retention.
  4. Safety & Comfort
    Less odor / irritant risk if formaldehyde or harsh chemicals are avoided. Better client and stylist experience.
  5. Versatility
    Can be offered across clients: those wanting smoothing, those wanting manageability, those recovering from damage.
  6. Customer Loyalty & Upsell
    Aftercare products (maintenance shampoo, mask, serum etc.) + periodic touch-ups = recurring revenue.

Standard Operating Procedure

STEP 1- Start With Triple detox Shampoo (if too much oil, go for second shampoo).
STEP 2- Blast Dry 100% and apply evenly, staying ½–1 inch away from the scalp. Comb through for even saturation (do not overload). Wrap it with clean wrap or shower cap and let it process for 60 mins (if coily hair, than keep for 90 mins).
STEP 3- Remove Excess Product. After 60 minutes, rinse with 1bowl of water (300ml water), if thick hair 1 and half bowl of water(450ml).
STEP 4- Blast dry and then, Blow-dry section by section on full heat and full speed until 100% dry.
STEP 5- Use thin sections while ironing and pass smoothly to seal. Set temperature at 230°C. While ironing, each section should be passed 18 to 20 times.
STEP 6- Once ironing is done wait for 10 mins and rinse at backwash and apply Botoplexx /Botoliss mask and keep it for 5 mins and rinse with cool water
STEP 7- Apply Frizzdismiss oil on towel dried hair and blast dry 100% to see soft, silky, shiny, results.
TIP :- Give even iron passes from root to end.
Quick Notes
Swimming/Gym: Best to avoid the pool; if necessary, wear a shower cap to keep hair dry. Gym is fine.
Maintain with Botoplexx/ Botoliss shampoo, mask, serum to extend results.

STEP 1- Start With Botoplexx Shampoo (if too much oil, go for second shampoo)
STEP 2- Blast Dry 50% and apply evenly, staying ½–1 inch away from the scalp. Comb through for even saturation (do not overload). Wrap it with clean wrap or shower cap and let it process for 60 mins.
STEP 3- Remove Excess Product. After 60 minutes, rinse with 1bowl of water (300ml water), if thick hair 1 and half bowl of water(450ml).
STEP 4- Blast dry and then, Blow-dry section by section on full heat and full speed until 100% dry.
STEP 5- Use thin sections while ironing and pass smoothly to seal. Set temperature at 190- 220°C. While ironing, each section should be passed 15 to 18times (always do visual check)
STEP 6- Once ironing is done wait for 10 mins and rinse at backwash and apply Botoplexx /Botoliss mask and keep it for 5 mins and rinse with cool water
STEP 7- Apply Frizzdismiss oil on towel dried hair and blast dry 100% to see soft, silky, shiny, results.
TIP :- Give even iron passes from root to end
Quick Notes
Swimming/Gym: Best to avoid the pool; if necessary, wear a shower cap to keep hair dry. Gym is fine. Maintain with Botoplexx/ Botoliss shampoo, mask, serum to extend results.

STEP 1- Start With Botoplexx Shampoo (if too much oil, go for second shampoo)
STEP 2- Apply Microfuel spray on damp hair, focusing only on the damaged areas, (take care not to overuse it as excess application may cause dryness). After this, begin the Nanoplasty treatment by applying the product evenly while staying ½–1 inch away from the scalp. Comb through for even saturation without overloading the hair, then wrap it with a clean wrap or shower cap and allow it to process for 45minutes.
STEP 3- Remove Excess Product. After 45 minutes, rinse with half bowl of water (150ml water).
STEP 4- Blast dry and then, Blow-dry section by section on full heat and full speed until 100% dry.
STEP 5- Use thin sections while ironing and pass smoothly to seal. Set temperature at 170- 190°C. While ironing, each section should be passed 12 to 15times (always do visual check)
STEP 6- Once ironing is done wait for 10 mins and rinse at backwash and apply Botoplexx /Botoliss mask and keep it for 5 mins and rinse with cool water
STEP 7- Apply Frizzdismiss oil on towel dried hair and blast dry 100% to see soft, silky, shiny, results.
TIP :- Give even iron passes from root to end
Quick Notes
Swimming/Gym: Best to avoid the pool; if necessary, wear a shower cap to keep hair dry. Gym is fine.
Maintain with Botoplexx/ Botoliss shampoo, mask, serum to extend result

Frequently Asked Questions

It’s a professional straightening treatment that smoothens, strengthens, and realigns hair using advanced 5th-Gen Tanino-Fusion Technology for sleek, frizz-free results with intense shine.

Results can reach up to 95% straightness. Actual results vary by hair type, history, and technique.

All hair types, from wavy to very curly/coily. It’s also suitable for hair that’s colored, chemically treated, or even henna-coated.

Yes. The treatment is described as 100% vegan.

Yes, it is.

It’s compatible with colored/chemically treated hair.

Longevity depends on hair type, wash frequency, water quality, and aftercare.

Botoplexx shampoo/conditioner/mask or Botoliss shampoo/mask.

It has a soothing smell and less fumes.

The application is 1 inch away from the scalp. (do not touch the scalp).

Always consult your healthcare provider before any chemical service during pregnancy or breastfeeding.

Yes, it's home-friendly. Achieve frizz-free, smooth, glossy hair at home by following the step-by-step instructions and heat settings.

Yes you can just skip the ironing part.

Botoplexx mainly designed for henna coated and dye hair. Botoliss specially designed for chemically treated hair. Nanoplasty for all types of hair.